Showing all 13 results

  • 370A-1 Illuminated PIR Timer – 3 Wire

    The PIR Timer is a fully automatic device which controls various power loads through the detection of body heat. Activated by the detection of moving body heat, the lighting or power load will then stay on for a preset period of time.

    If body heat is no longer detected, the time period will elapse and the load will be switched off. An internal light sensor will keep the lighting switched off when sufficient ambient light is available, further increasing the energy saving potential of the PIR Timer. The unit also has an override switch on the faceplate.

    Key Features

    • Fits into 25mm depth back boxes
    • Time settings from 2 mins to 2 hours
    • Lux level control
    • 360˚ detection
    • 5 -7 m detection range

    370A-1

    • 3 wire (Live, switch live and neutral required)

    Typical applications:

    • Suitable for lighting, heating, ventilation systems and contactor coils.
    • Suitable for use in any area where control will help reduce energy usage

    Technical details

    • 240V a.c. / 50Hz
    • 16A lighting load
    • CE Marked
    • Complies with BS EN 60669, 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.5W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 370B-1 Standard PIR Timer – 3 Wire

    The PIR Timer is a fully automatic device which controls various power loads through the detection of body heat. Activated by the detection of moving body heat, the lighting or power load will then stay on for a preset period of time.

    If body heat is no longer detected, the time period will elapse and the load will be switched off. An internal light sensor will keep the lighting switched off when sufficient ambient light is available, further increasing the energy saving potential of the PIR Timer.

    Key Features

    • 10A any load type
    • Requires Capacitor PFCC-1 for all types of low wattage/low voltage loads
    • Fits into 25mm depth back boxes
    • Time settings from 2 mins to 1 hour
    • Lux level control
    • 360˚ detection
    • 5 – 7 m detection range

    370B-1

    • 3 wire (Live, switch live and neutral)
    • Can be interlinked with other 370B-1 PIR timers

    Typical applications:

    • Commonly used to control all load types and appliances in any room
    • Suitable for retrofit into any type of circuit with a neutral

    Technical details

    • 240V a.c. / 50Hz
    • 10A all load types
    • CE Marked
    • Complies with BS EN 60669-1, 60669-2-1, 60669-2-3.
    • 370B-1 Power Consumption 0.52W
    • 376B-1 Power Consumption 1W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 374-CMPIRDALI ELKAY easyDALi CEILING MOUNT PIR

    The ceiling mounted Elkay easyDALi PIR has full DALI flexibility and is the intelligent sensor element of the Elkay easyDALi system, automatically addressing the lighting ballasts without the need for expensive programming controllers.

    The PIR is switched on by the detection of moving body heat within a specified range. When this moving body heat is no longer detected the unit will dim down the luminaires and eventually switch off. It will also automatically harvest available daylight to maximise energy savings.

    With the dual purpose remote control it is possible to set dimming time delays and Room and Corridor options. There are also helpful coloured feedback LEDs to make programming easier.

     

    Key Features

    • Presence and absence detection
    • Automatic daylight harvesting
    • Settable time modes including 4 room options and 4 corridor options
    • Basic Luminaire set up without commissioning tools
    • Broadcast and group functions
    • Manual Lux Level and sensitivity control
    • Walk Test mode
    • 360o Detection
    • 6-7m detection range
    • Coloured feedback LEDs
    • Can control LED and fluorescent easyDALi luminaires
    • Lifetime adjustment with dual purpose remote control

    Typical applications:

    • Suitable for commercial and institutional easyDALi lighting applications

    Get brochure

  • 374B-1 Ceiling Mount PIR Occupancy Sensor

    The Elkay Ceiling Mount PIR Occupancy Sensor is an energy saving device to switch electrical loads when there is presence or absence detected. This PIR timer unit is an all in one solution in a box that has been specifically designed for both surface and flush ceiling mounting and includes spring fixing arms and surface box for quick and easy installation. This compact unit is one of the smallest most discrete units available and provides a flexible, reliable fit and forget solution.

    The PIR is a time switch designed to sense moving infra-red such as moving body heat, and activate a load or appliance for a specified time period. An internal light sensor will keep the load switched off when sufficient ambient light is available.

    A red indicator LED signifies when timing has been re-triggered and when the unit is in its final minute of countdown. Time control is adjustable from 2 minutes to 1 hour and the unit features a white and chrome bezel allowing easy access to timing, lux and sensitivity control without the need for removing from the ceiling.

    The Elkay Ceiling Mount PIR only requires a 64mm cut out for flush mounting.

     

    Features:

    • 10A any load type
    • Sensitivity Adjustment control
    • Auto Lux and Manual Lux for extra daylight saving control
    • 10 second test mode to speed up installation time
    • Surface and Flush mount option
    • Time settings from 2mins to 1 hour
    • 360˚ Detection.
    • 6 – 7 m detection range
    • 3 wire (Live, Switch live and Neutral required)
    • Can be interlinked with other 374B-1 PIR timers
    • 64 mm cut out

    Typical applications:

    • Suitable for any load types such as lighting, heating, ventilation systems and contactor coils.
    • Suitable for use in any area where control will help reduce energy usage.

    Technical details:

    • 240V a.c. / 50Hz
    • 10A any load type
    • CE Marked
    • Complies with BS EN 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.9W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 374B-1FPC Fireproof Ceiling Mount PIR Occupancy Sensor

    This PIR timer unit has been specifically designed to meet the growing need from building control to maintain fireproof qualities in ceilings in public buildings and new build extensions. Its intelligent pre-wired design is particularly useful for ceilings where access above is limited or difficult. This compact unit is one pre-wired for your convenience and has intumescent seals designed to comply with domestic and commercial fire requirements from building control. This product is pre wired with a 1m lead for your convenience. The Elkay Ceiling Mount PIR Occupancy Sensor is an energy saving device to switch electrical loads when there is presence or absence detected. This PIR timer unit is an all in one solution in a box that has been specifically designed for both surface and flush ceiling mounting and includes spring fixing arms and surface box for quick and easy installation. This compact unit is one of the smallest most discrete units available and provides a flexible, reliable fit and forget solution.

    The PIR is a time switch designed to sense moving infra red such as moving body heat, and activate a load or appliance for a specified time period. An internal light sensor in the switch will keep the load switched off when sufficient ambient light is available.

    A red indicator LED signifies when timing has been re-triggered and when the unit is in its final minute of countdown. Time control is adjustable from 2 minutes to 1 hour and the unit features a white and chrome bezel allowing easy access to timing, lux and sensitivity control without the need for removing from the ceiling.

    Key Features

    • Fireproof Can with 60 minute fire protection
    • 10A any load type
    • Sensitivity adjustment control
    • Auto Lux and Manual Lux for extra daylight saving control
    • 10 second test mode to speed up installation time
    • Surface and flush mount option
    • Time settings from 2 mins to 1 hour
    • 360˚ detection
    • 6 – 7 m detection range
    • 3 wire (Live, switch live and neutral required)
    • Pre wired for your convenience
    • Can be interlinked with other 374B-1FPC PIR timers
    • With 1 metre lead for your convenience

    Typical applications:

    • Suitable for all load types such as lighting, heating, ventilation systems and contactor coils.
    • Suitable for use in any area where control will help reduce energy usage
    • Provides protection for 60 minutes in event of a fire and ideal for ceilings where access is limited, building control assess compliance and fireproofing must be maintained.

    Technical details:

    • 240V a.c. / 50Hz
    • 10A any load type
    • CE Marked
    • Complies with BS EN 60669, 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.5W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 374B-1L Ceiling Mount PIR Timer (3 wire)

    The Elkay Ceiling Mount PIR Occupancy Sensor is an energy saving device to switch electrical loads when there is presence or absence detected. This PIR timer unit is an all in one solution in a box that has been specifically designed for both surface and flush ceiling mounting and includes spring fixing arms and surface box for quick and easy installation. This compact unit is one of the smallest most discrete units available and provides a flexible, reliable fit and forget solution.

    The PIR is a time switch designed to sense moving infra-red such as moving body heat, and activate a load or appliance for a specified time period. An internal light sensor will keep the load switched off when sufficient ambient light is available.

    A red indicator LED signifies when timing has been re-triggered and when the unit is in its final minute of countdown. Time control is adjustable from 2 minutes to 1 hour and the unit features a white and chrome bezel allowing easy access to timing, lux and sensitivity control without the need for removing from the ceiling.

    The Elkay Ceiling Mount PIR only requires a 64mm cut out for flush mounting.

     

    Features:

    • 10A any load type
    • Sensitivity Adjustment control
    • Auto Lux and Manual Lux for extra daylight saving control
    • 10 second test mode to speed up installation time
    • Surface and Flush mount option
    • Time settings from 2mins to 1 hour
    • 360˚ Detection.
    • 6 – 7 m detection range
    • 3 wire (Live, Switch live and Neutral required)
    • Can be interlinked with other 374B-1 PIR timers
    • 64 mm cut out

    Typical applications:

    • Suitable for any load types such as lighting, heating, ventilation systems and contactor coils.
    • Suitable for use in any area where control will help reduce energy usage.

    Technical details:

    • 240V a.c. / 50Hz
    • 10A any load type
    • CE Marked
    • Complies with BS EN 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.9W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 374C-1 Flush Mount PIR Timer

    The Flush Mount PIR Timer is an energy savingdevice to switch loads only when there is presence or absence detected. This PIR timer unit has been specifically designed for ceiling mounting and includes spring fixing arms for quick and easyinstallation. This compact unit is one of the smallest most discrete units available.

    The PIR is a time switch designed to sense movinginfra red such as moving body heat, and activate a load or appliance for a specified time period. An internal light sensor in the switch will keep the load switched off when sufficient ambient light is available.

    A green indicator LED signifies when timing has been retriggered and when the unit is in its final minute of countdown. Time control is adjustable from 30 seconds to 30 minutes and the unit features easy access to timing and lux level control without the need for removing from the ceiling.

    The Elkay Ceiling Mount PIR only requires a 64mm cut out for flush mounting.

     

    Features:

    • 6A any load type
    • Manual Lux for extra daylight saving control
    • Time settings from 30 seconds to 30 minutes• 360o Detection
    • 6 – 7 m detection range
    • 3 wire with a neutral being required
    • Can be interlinked with other 374C-1 PIR timers
    • Can be wired with single gang switch and work as an absence detector
    • 64 mm cut out

    Typical applications:

    • Suitable for lighting (Instant start or hot re-strike only), heating, ventilation systems and contactor coils
    • Suitable for use in all areas where timed control can help efficient energy usage. Manual Lux for extra daylight saving.

    Technical details:

    • 240V a.c. / 50Hz
    • 10A any load type
    • CE Marked
    • Complies with BS EN 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.9W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochureFlush mount PIR timer

  • 376A-1 Illuminated PIR Timer – 2 Wire

    The PIR Timer is a fully automatic device which controls various power loads through the detection of body heat. Activated by the detection of moving body heat, the lighting or power load will then stay on for a preset period of time.

    If body heat is no longer detected, the time period will elapse and the load will be switched off. An internal light sensor will keep the lighting switched off when sufficient ambient light is available, further increasing the energy saving potential of the PIR Timer. The unit also has an override switch on the faceplate.

    Key Features

    • Fits into 25mm depth back boxes
    • Time settings from 2 mins to 2 hours
    • Lux level control
    • 360˚ detection
    • 5 -7 m detection range

    376A-1

    • 2 wire (Live and switch live only)
    • No neutral required

    Typical applications:

    • Suitable for lighting only
    • Suitable for use in any area where control will help reduce energy usage

    Technical details

    • 240V a.c. / 50Hz
    • 16A lighting load
    • CE Marked
    • Complies with BS EN 60669, 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.5W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 376A-3 Illuminated PIR Timer – 3 Core

    Stylish, electronic time delay activator switch for inter-connection with any master timer control. Any combination of activator units can be wired to any master, thus giving a variety of activation functions in one area all operating from one central master (Only one master per circuit).

    Activator switches must be used with an Elkay master timer from the Elkay family of switches. The activator activates the master unit and cannot be used on its own.

    Key Features

    • 16A any load type
    • 3 core – Live, Switch live and Trigger required to connect to master
    • No Neutral required
    • Blue Locator ring
    • Must be connected to an Elkay master timer. (Only one master per circuit).
    • Fits into 25mm depth back boxes
    • Typical applications

    Typical applications

    • It can only be used with the master switch when multiple switches are required. Any number of activators can be used in circuit and can also replace intermediate switches.

    Technical details

    • 240V a.c. / 50Hz
    • 16A lighting load
    • CE Marked
    • Complies with BS EN 60669, 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.5W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 376B-1 Standard PIR Timer – 2 Wire

    The PIR Timer is a fully automatic device which controls various power loads through the detection of body heat. Activated by the detection of moving body heat, the lighting or power load will then stay on for a preset period of time.

    If body heat is no longer detected, the time period will elapse and the load will be switched off. An internal light sensor will keep the lighting switched off when sufficient ambient light is available, further increasing the energy saving potential of the PIR Timer.

    Key Features

    • 10A any load type
    • Requires Capacitor PFCC-1 for all types of low wattage/low voltage loads
    • Fits into 25mm depth back boxes
    • Time settings from 2 mins to 1 hour
    • Lux level control
    • 360˚ detection
    • 5 – 7 m detection range

    376B-1

    • 2 wire (Live, switch live only)
    • No neutral required
    • Can be interlinked with other 376B-1 PIR timers
    • A 24 hour uninterrupted supply is required

    Typical applications:

    • General purpose PIR for use with lighting loads only
    • Suitable for retrofit into any type of lighting circuit

    Technical details

    • 240V a.c. / 50Hz
    • 10A all load types
    • CE Marked
    • Complies with BS EN 60669-1, 60669-2-1, 60669-2-3.
    • 370B-1 Power Consumption 0.52W
    • 376B-1 Power Consumption 1W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 380A-1 Microwave Motion Sensor

    The 380A-1 Microwave Motion Sensor is a high performance presence detector with built in Lux level and sensitivity adjustment. The unit sends out a high frequency sound wave over a range of up to 30 metres and is switched ON by changes to the sound wave caused by movement within the detection zone. With no changes to the sound wave, the unit will switch OFF after the adjustable time period has elapsed.

    The sensor has Lux level adjustment, measures the ambient light levels and prevents the lighting being switched ON when there is sufficient light in the room. It also has a sensitivity range adjustment pot.

    Features

    • 16A any load type (requires Capacitor PFCC-1 for all types of low wattage and LED loads)
    • 3 wire (Live, Switch live and Neutral required)
    • Wall mounted for best coverage but can be ceiling mounted if required.
    • Lux level/Daylight adjustment
    • Clip on front cover to conceal screws
    • Sensitivity Adjustment
    • Option to retrofit into existing systems
    • Time setting from 2 mins to 2 hours
    • 15m to 30m detection range utilising an elliptical beam

    Typical applications

    • Suitable for lighting, heating, ventilation systems and contactor coils.
    • Suitable for use in any area where control will help reduce energy usage
    • Suitable for High bay, warehouse, sports halls gymnasiums, classrooms etc

    Technical details

    • 240V a.c. / 50Hz
    • 16A all load type
    • CE Marked
    • Complies with BS EN 60669, 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 1W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 570A-1 Illuminated Outdoor PIR Timer

    The Outdoor Illuminated PIR Timer (IP66) is a fully automatic device which controls various power loads through the detection of moving body heat. If body heat is no longer detected, the time period will elapse and the load will be switched off.

    An internal light sensor will keep the load switched off when sufficient ambient light is available, further increasing the energy saving potential of the PIR Timer. The unit also has an override switch. This IP66 rated intelligent unit, provides variable timing selection and incorporates an override facility. These intelligent units have the ability to latch back on to the mains power supply and reset in the event of a power cut.

    Featuring a backlit blue neon indicator ring to aid location in the dark, these intelligent units have the ability to latch back on to the mains power supply and reset in the event of a power cut. The unit is supplied with a surface mounted back box with knockouts on five faces, mounting screws and screw cover seals and nylon sealing washers. The back box provided must be used as this gives the IP rating and all connections to it must also be IP rated.

    Key features

    • IP66 rated
    • 16A any load type
    • Blue locator ring
    • Manual override of the Lux Level setting
    • Override OFF capability
    • Can be interlinked in parallel with other 3 wire Elkay outdoor timer to create multiple switching points.
    • 360˚ detection utilising an elliptical beam
    • 5 – 7 m detection range
    • Timer settings from 2 mins to 2 hours
    • Timings start from last detection

    570A-1

    • 3 wire (Live, switch live and neutral required)

    Typical applications

    • Commonly used for lighting where there is a neutral, to control all load types such as fluorescent, resistive and LED loads

    Technical details

    • IP66 rated
    • 240V a.c. / 50Hz
    • 16A all load types
    • CE Marked
    • Complies with BS EN 60669, 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.65W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 770A-2 Illuminated PIR  Timer BSS 3 wire

    For the ultimate in reliability this stylish, slimline PIR timer is activated on detection of moving body heat. The PIR timer is a fully automatic device which controls lighting and other loads through the detection of moving body heat, providing a contemporary solution to energy saving. The contemporary commercial and domestic decor. An internal light sensor can be adjusted to keep the lighting off when the chosen ambient light level is reached increasing the energy saving potential of the PIR timer.

    Key Features

    • Passive Infra-Red movement sensor
    • Stylish stainless steel flush plate
    • For general purpose loads including resistive loads, LED, incandescent and fluorescent lighting
    • Re-trigger function
    • Concealed fixing screws
    • Last minute indicator
    • 16A any load type
    • Blue Locator ring
    • Lux Level setting
    • Override OFF capability
    • 360o detection utilising an elliptical beam
    • 5 – 7 m detection range
    • Time settings from 2 mins to 2 hours
    • Timings start from last detection

    Get brochure