376A-1 Illuminated PIR Timer – 2 Wire

Illuminated PIR Timer – 2 Wire 376A-1: Product Description

The PIR Timer is a fully automatic device which controls various power loads through the detection of body heat. Activated by the detection of moving body heat, the lighting or power load will then stay on for a preset period of time.

If body heat is no longer detected, the time period will elapse and the load will be switched off. An internal light sensor will keep the lighting switched off when sufficient ambient light is available, further increasing the energy saving potential of the PIR Timer. The unit also has an override switch on the faceplate.

Illuminated PIR Timer – 2 Wire 376A-1: Key Features
  • Fits into 25mm depth back boxes
  • Time settings from 2 mins to 2 hours
  • Lux level control
  • 360˚ detection
  • 5 -7 m detection range
  • 2 wire (Live and switch live only)
  • No neutral required
Illuminated PIR Timer – 2 Wire 376A-1: Typical Applications:
  • Suitable for lighting only
  • Suitable for use in any area where control will help reduce energy usage
Illuminated PIR Timer – 2 Wire 376A-1: Technical Details
  • 240V a.c. / 50Hz
  • 16A all load types including resistive, inductive, fluorescent and LED lighting
  • CE Marked
  • Complies with BS EN 60669, 60669-1, 60669-2-1, 60669-2-3.
  • Power Consumption 0.5W
  • Flame Retardant ABS material
  • RoHS compliant

Get Catalogue Page

ELKAY Switch & Timer Instructions

Part No. Description Configuration Finish Rating
376A-1*** Illuminated PIR Timer 2 wire Master 2 Wire* for lighting only White 16A-240V

*PFCC-1 Capacitor will often be required when switching certain types of load
**Activator unit must be used with illuminated range for multiway switching and connected with 3 Core cables to Master unit.

Illuminated PIR Timer – 2 Wire (for lighting only)

Dipswitches for 2 Wire Switches & Wall Sensors Please note that the black bar denotes the position of the dip switch
Plan View for the top diagram and Side view for the lower diagram Elkay PIR Occupancy sensors will detect any person passing the wall mounted sensor and switch on the load connected.