Showing all 39 results

  • 163 Columbus Shroud Splash Proof

    The 163 is a protective cover kit consisting of rubber shroud, finger ring, gasket and 2 screws

    Suitable for use with 400A and 400A-3 time delay switches

    Makes your switch suitable for damp areas and prevents damage to the switch.

    WARNING – Does not provide switch with an IP rating for outdoor use

  • 210A-1 ELKAY SURFACE WALL MOUNT BOX

    The Wall Mount Box is recommended for surface mounting of the Elkay Illuminated range where the switch and box profile need to match.

  • 220A-1 ELKAY WALL SPACER PLATE

    Designed to fit between a switch or timer and the wall where standard 16mm cavity boxes have already been installed, saving installation time and not having to replace cavity back box with a 25mm deep box.

  • 2235A-1 Illuminated Touch Timer – 3 Wire

    The Touch Timer offers energy saving features at the lightest of touches. With the reliability of a fully electronic unit, with no mechanical moving parts, it has all the features of the Elkay push button timer unit with the additional benefit of feather light touch activation.

    Variable timing selection, a backlit blue neon indicator ring and automatic reset are all part of this feature-packed device. It is also suitable for multi-way applications.

    Key Features

    • 16A any load type 3 wire (Live, switch live and neutral required)
    • Blue Locator ring
    • Can be interlinked with any Elkay activator switches (Only one master per circuit)
    • Fits into 25mm depth back boxes
    • Requires Capacitor PFCC-1 for all types of low wattage loads and in particular LED lighting
    • 5 – 7 m detection range
    • 16 Timer settings from 2 mins to 2 hours

    2235A-1

    • 3 wire (Live, switch live and neutral required)

    Typical applications:

    • Suitable for lighting, heating, ventilation systems and contactor coils
    • Suitable for use in any area where control will help reduce energy usage

    Technical details

    • 240V a.c. / 50Hz
    • 16A all load types
    • CE Marked
    • Complies with BS EN 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.65W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 320A-1 Remote Timer

    This remote timer is ideal for use with an Elkay activator switch and other retractive or momentary activated switches. It is also useful where the time adjustment is to be protected from end users making unauthorised timing alterations. This intelligent unit provides variable timing selection via-dip switch selection. The unit has a blank faceplate and is therefore tamper proof.

    On installation the timing delay can be set for periods of between 2 minutes and 2 hours.

    Features

    • 16A any load type (requires Capacitor PFCC-1 for all types of low wattage and LED loads and Contactor)
    • For general purpose loads including resistive loads and incandescent / fluorescent lighting
    • 3 wire (Live, Switch live and Neutral required)
    • Can be interlinked with Elkay activator, Retractive or Momentary Switches
    • Clip on front plate 8mm deep
    • Fits into 25mm depth back boxes
    • Time setting from 2 mins to 2 hours

    Typical applications

    • The Remote Timer is designed for general purpose loads, which enables it to be used on a variety of applications from lighting through to heating and ventilation. As it can be connected to a wide variety of activator or momentary switches, it provides installers with a large choice of activating switch.

    Technical details

    • 240V a.c. / 50Hz
    • 16A Maximum Load
    • CE Marked
    • Complies with BS EN 60669, 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.5W
    • Flame Retardant ABS material
    • RoHS complaint

    Get brochure

  • 350A-1 Illuminated Push Button Timer – 2 Wire

    A stylish, illuminated push button timer suitable for retrofit into any wiring system. Provides energy saving functionality by turning off the power source via timer, to avoid unnecessary power usage. The push button timer can be used in conjunction activator devices for multi-way applications. A Capacitor must be used in the circuit when switching low wattage loads such as fluorescent, compact fluorescent, and LED’s.

     

    Key Features

    • 16A any load type
    • Blue Locator ring
    • One minute countdown LED indicator
    • Re-set timing sequence at any time during countdown
    • Can be interlinked with any Elkay activator switches (Only one master per circuit)
    • Fits into 25mm depth back boxes
    • Time settings from 2 mins to 2 hours

    350A-1

    • 2 wire (Live and switch live required)
    • A 24 hour uninterrupted supply is required
    • No neutral required
    • Intelligent power search function

    Typical applications:

    • Commonly used to control lighting in corridors and stairwells
    • Can be used as a 1 way switch to control room lighting
    • Suitable for lighting (Instant start or hot re-strike only)

    Technical details

    • 240V a.c. / 50Hz
    • 16A all load types
    • CE Marked
    • Complies with BS EN 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.5W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 350A-3 Illuminated Push Button Timer – 3 Core

    A stylish, illuminated push button timer suitable for retrofit into any wiring system. Provides energy saving functionality by turning off the power source via timer, to avoid unnecessary power usage. The push button timer can be used in conjunction activator devices for multi-way applications. A Capacitor must be used in the circuit when switching low wattage loads such as fluorescent, compact fluorescent, and LED’s.

     

    Key Features

    • 16A any load type
    • Blue Locator ring
    • One minute countdown LED indicator
    • Re-set timing sequence at any time during countdown
    • Can be interlinked with any Elkay activator switches (Only one master per circuit)
    • Fits into 25mm depth back boxes
    • Time settings from 2 mins to 2 hours

    350A-3

    • 3 core – Live, switch live and trigger required (Switch live optional if blue ring indicator is not required)
    • No Neutral required
    • Activators must be used when more than one switch is required in circuit and must be wired in three core to an Elkay master timer from the illuminated range. Only one master per circuit.
    • All other switches must be activators.

    Typical applications:

    • Commonly used to control lighting in corridors and stairwells with the master push button timer

    Technical details

    • 240V a.c. / 50Hz
    • 16A all load types
    • CE Marked
    • Complies with BS EN 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.5W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 350B-1 Standard Push Button Timer – 2 Wire

    The Standard Push Button Timer is an energy saving device to switch loads for a pre-selected time period. It fits easily into a British Standard back box of 25mm depth and does not require a neutral. The timer can be interlinked in parallel with other Elkay timers to create multiply switching points. It can also replace an existing switch at the switch point to provide energy saving functionality by timing lighting off to avoid unnecessary power usage.

    A Capacitor must be used in the circuit when switching low wattage loads such as Fluorescent, compact fluorescent, and LED’s.

    Key Features

    • 10A any load type
    • Can be retrofitted into any type of lighting wiring circuit
    • Can be interlinked with other standard push button timers
    • Time setting from 2 mins to 1 hour

    350B-1

    • 2 wire (Live and switch live)
    • A 24 hour uninterrupted supply is required

    Typical applications:

    • General purpose timer for use with lighting loads
    • Suitable for retrofit into any type of circuit
    • Suitable for use in any area where control will help reduce energy usage

    Technical details

    • 240V a.c. / 50Hz
    • 10A all load types
    • CE Marked
    • Complies with BS EN 60669-1, 60669-2-1, 60669-2-3.
    • 3875B-1 – Power Consumption 0.4W
    • 350B-1 – Power Consumption 0.7W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 360A-1 Illuminated Touch Timer – 2 Wire

    The Touch Timer offers energy saving features at the lightest of touches. With the reliability of a fully electronic unit, with no mechanical moving parts, it has all the features of the Elkay push button timer unit with the additional benefit of feather light touch activation.

    Variable timing selection, a backlit blue neon indicator ring and automatic reset are all part of this feature-packed device. It is also suitable for multi-way applications.

    Key Features

    • 16A any load type 3 wire (Live, switch live and neutral required)
    • Blue Locator ring
    • Can be interlinked with any Elkay activator switches (Only one master per circuit)
    • Fits into 25mm depth back boxes
    • Requires Capacitor PFCC-1 for all types of low wattage loads and in particular LED lighting
    • 5 – 7 m detection range
    • 16 Timer settings from 2 mins to 2 hours

    360A-1

    • 2 wire (Live and switch live only)
    • A 24 hour uninterrupted supply is required
    • No neutral required

    Typical applications:

    • Suitable for lighting only
    • Suitable for use in any area where control will help reduce energy usage

    Technical details

    • 240V a.c. / 50Hz
    • 16A all load types
    • CE Marked
    • Complies with BS EN 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.65W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 360A-3 Illuminated Touch Timer – 3 Core

    The Touch Timer offers energy saving features at the lightest of touches. With the reliability of a fully electronic unit, with no mechanical moving parts, it has all the features of the Elkay push button timer unit with the additional benefit of feather light touch activation.

    Variable timing selection, a backlit blue neon indicator ring and automatic reset are all part of this feature-packed device. It is also suitable for multi-way applications.

    Key Features

    • 16A any load type 3 wire (Live, switch live and neutral required)
    • Blue Locator ring
    • Can be interlinked with any Elkay activator switches (Only one master per circuit)
    • Fits into 25mm depth back boxes
    • Requires Capacitor PFCC-1 for all types of low wattage loads and in particular LED lighting
    • 5 – 7 m detection range
    • 16 Timer settings from 2 mins to 2 hours

    360A-3

    • 3 core – Live, switch live and trigger required to connect to master
    • No neutral required
    • Any number of activators can be used in circuit and can also replace intermediate switches

    Typical applications:

    • Can only be used with the master switch when multiple switches are required

    Technical details

    • 240V a.c. / 50Hz
    • 16A all load types
    • CE Marked
    • Complies with BS EN 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.65W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 370A-1 Illuminated PIR Timer – 3 Wire

    The PIR Timer is a fully automatic device which controls various power loads through the detection of body heat. Activated by the detection of moving body heat, the lighting or power load will then stay on for a preset period of time.

    If body heat is no longer detected, the time period will elapse and the load will be switched off. An internal light sensor will keep the lighting switched off when sufficient ambient light is available, further increasing the energy saving potential of the PIR Timer. The unit also has an override switch on the faceplate.

    Key Features

    • Fits into 25mm depth back boxes
    • Time settings from 2 mins to 2 hours
    • Lux level control
    • 360˚ detection
    • 5 -7 m detection range

    370A-1

    • 3 wire (Live, switch live and neutral required)

    Typical applications:

    • Suitable for lighting, heating, ventilation systems and contactor coils.
    • Suitable for use in any area where control will help reduce energy usage

    Technical details

    • 240V a.c. / 50Hz
    • 16A lighting load
    • CE Marked
    • Complies with BS EN 60669, 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.5W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 370B-1 Standard PIR Timer – 3 Wire

    The PIR Timer is a fully automatic device which controls various power loads through the detection of body heat. Activated by the detection of moving body heat, the lighting or power load will then stay on for a preset period of time.

    If body heat is no longer detected, the time period will elapse and the load will be switched off. An internal light sensor will keep the lighting switched off when sufficient ambient light is available, further increasing the energy saving potential of the PIR Timer.

    Key Features

    • 10A any load type
    • Requires Capacitor PFCC-1 for all types of low wattage/low voltage loads
    • Fits into 25mm depth back boxes
    • Time settings from 2 mins to 1 hour
    • Lux level control
    • 360˚ detection
    • 5 – 7 m detection range

    370B-1

    • 3 wire (Live, switch live and neutral)
    • Can be interlinked with other 370B-1 PIR timers

    Typical applications:

    • Commonly used to control all load types and appliances in any room
    • Suitable for retrofit into any type of circuit with a neutral

    Technical details

    • 240V a.c. / 50Hz
    • 10A all load types
    • CE Marked
    • Complies with BS EN 60669-1, 60669-2-1, 60669-2-3.
    • 370B-1 Power Consumption 0.52W
    • 376B-1 Power Consumption 1W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 374-CMPIRDALI ELKAY easyDALi CEILING MOUNT PIR

    The ceiling mounted Elkay easyDALi PIR has full DALI flexibility and is the intelligent sensor element of the Elkay easyDALi system, automatically addressing the lighting ballasts without the need for expensive programming controllers.

    The PIR is switched on by the detection of moving body heat within a specified range. When this moving body heat is no longer detected the unit will dim down the luminaires and eventually switch off. It will also automatically harvest available daylight to maximise energy savings.

    With the dual purpose remote control it is possible to set dimming time delays and Room and Corridor options. There are also helpful coloured feedback LEDs to make programming easier.

     

    Key Features

    • Presence and absence detection
    • Automatic daylight harvesting
    • Settable time modes including 4 room options and 4 corridor options
    • Basic Luminaire set up without commissioning tools
    • Broadcast and group functions
    • Manual Lux Level and sensitivity control
    • Walk Test mode
    • 360o Detection
    • 6-7m detection range
    • Coloured feedback LEDs
    • Can control LED and fluorescent easyDALi luminaires
    • Lifetime adjustment with dual purpose remote control

    Typical applications:

    • Suitable for commercial and institutional easyDALi lighting applications

    Get brochure

  • 374-DMBOX ELKAY easyDALi MULT PURPOSE CONNECT BOX

    The Multi-Purpose Box gives installers maximum flexibility and true freedom in building a DALI system by allowing them to use their OWN cablechoice without needing expensive connectors. The box allows the installer to either use it to connect up multiple strings of DALI PIRS OR allows them to connect up to 10A of lighting loads or use it for both.

    Key Features

    • DALI Multi-Purpose Box for maximum connection flexibility
    • Connects up multiple strings of DALI PIRS and lighting
    • Maximum 10A rating per box
    • 8 Multiple connections per box
    • Connects power supply for Elkay easyDALi network
    • Can control LED and fluorescent DALI luminaires

    Get brochure

  • 374-DREM ELKAY easyDALi REMOTE CONTROL

    The Elkay easyDALi remote control is an ergonomic hand held device to program and adjust sensors in the Elkay easyDALi range.Consisting of eight soft touch buttons to control the Elkay easyDALi PIR, It can program basic installation and commissioning functionality. It also has a hidden button that changes the remote control from user mode to Installer Mode

    Key Features

    • Dual purpose easyDALi Remote Control
    • For use with Elkay easyDALi system
    • User mode for day to day control
    • Override on/off• Illumination adjustment
    • Scene selection
    • Fixed illumination settings
    • Reset to daylight harvesting
    • 25% brightness level
    • 50% brightness level
    • 100% brightness level
    • Installer configuration tool

    Typical applications:

    • Suitable for commercial and institutional easyDALi lighting applications

    Get brochure

  • 374-PSU ELKAY easyDALi POWER SUPPLY UNIT

    Essential to power the network of easyDALi PIR sensors and DALI luminaire ballasts connected into the system.

    Key Features

    • For use with Elkay easyDALi system
    • Powers DALI network of PIRS and lighting ballasts
    • Thermal and overload protection
    • Connected to multi-purpose connection box
    • 18V d.c. 250mA

    Typical applications:

    • For use with Elkay easyDALi system
    • Suitable for lighting commercial and institutional applications

    Get brochure

  • 374B-1 Ceiling Mount PIR Occupancy Sensor

    The Elkay Ceiling Mount PIR Occupancy Sensor is an energy saving device to switch electrical loads when there is presence or absence detected. This PIR timer unit is an all in one solution in a box that has been specifically designed for both surface and flush ceiling mounting and includes spring fixing arms and surface box for quick and easy installation. This compact unit is one of the smallest most discrete units available and provides a flexible, reliable fit and forget solution.

    The PIR is a time switch designed to sense moving infra-red such as moving body heat, and activate a load or appliance for a specified time period. An internal light sensor will keep the load switched off when sufficient ambient light is available.

    A red indicator LED signifies when timing has been re-triggered and when the unit is in its final minute of countdown. Time control is adjustable from 2 minutes to 1 hour and the unit features a white and chrome bezel allowing easy access to timing, lux and sensitivity control without the need for removing from the ceiling.

    The Elkay Ceiling Mount PIR only requires a 64mm cut out for flush mounting.

     

    Features:

    • 10A any load type
    • Sensitivity Adjustment control
    • Auto Lux and Manual Lux for extra daylight saving control
    • 10 second test mode to speed up installation time
    • Surface and Flush mount option
    • Time settings from 2mins to 1 hour
    • 360˚ Detection.
    • 6 – 7 m detection range
    • 3 wire (Live, Switch live and Neutral required)
    • Can be interlinked with other 374B-1 PIR timers
    • 64 mm cut out

    Typical applications:

    • Suitable for any load types such as lighting, heating, ventilation systems and contactor coils.
    • Suitable for use in any area where control will help reduce energy usage.

    Technical details:

    • 240V a.c. / 50Hz
    • 10A any load type
    • CE Marked
    • Complies with BS EN 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.9W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 374B-1FPC Fireproof Ceiling Mount PIR Occupancy Sensor

    This PIR timer unit has been specifically designed to meet the growing need from building control to maintain fireproof qualities in ceilings in public buildings and new build extensions. Its intelligent pre-wired design is particularly useful for ceilings where access above is limited or difficult. This compact unit is one pre-wired for your convenience and has intumescent seals designed to comply with domestic and commercial fire requirements from building control. This product is pre wired with a 1m lead for your convenience. The Elkay Ceiling Mount PIR Occupancy Sensor is an energy saving device to switch electrical loads when there is presence or absence detected. This PIR timer unit is an all in one solution in a box that has been specifically designed for both surface and flush ceiling mounting and includes spring fixing arms and surface box for quick and easy installation. This compact unit is one of the smallest most discrete units available and provides a flexible, reliable fit and forget solution.

    The PIR is a time switch designed to sense moving infra red such as moving body heat, and activate a load or appliance for a specified time period. An internal light sensor in the switch will keep the load switched off when sufficient ambient light is available.

    A red indicator LED signifies when timing has been re-triggered and when the unit is in its final minute of countdown. Time control is adjustable from 2 minutes to 1 hour and the unit features a white and chrome bezel allowing easy access to timing, lux and sensitivity control without the need for removing from the ceiling.

    Key Features

    • Fireproof Can with 60 minute fire protection
    • 10A any load type
    • Sensitivity adjustment control
    • Auto Lux and Manual Lux for extra daylight saving control
    • 10 second test mode to speed up installation time
    • Surface and flush mount option
    • Time settings from 2 mins to 1 hour
    • 360˚ detection
    • 6 – 7 m detection range
    • 3 wire (Live, switch live and neutral required)
    • Pre wired for your convenience
    • Can be interlinked with other 374B-1FPC PIR timers
    • With 1 metre lead for your convenience

    Typical applications:

    • Suitable for all load types such as lighting, heating, ventilation systems and contactor coils.
    • Suitable for use in any area where control will help reduce energy usage
    • Provides protection for 60 minutes in event of a fire and ideal for ceilings where access is limited, building control assess compliance and fireproofing must be maintained.

    Technical details:

    • 240V a.c. / 50Hz
    • 10A any load type
    • CE Marked
    • Complies with BS EN 60669, 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.5W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 374B-1L Ceiling Mount PIR Timer (3 wire)

    The Elkay Ceiling Mount PIR Occupancy Sensor is an energy saving device to switch electrical loads when there is presence or absence detected. This PIR timer unit is an all in one solution in a box that has been specifically designed for both surface and flush ceiling mounting and includes spring fixing arms and surface box for quick and easy installation. This compact unit is one of the smallest most discrete units available and provides a flexible, reliable fit and forget solution.

    The PIR is a time switch designed to sense moving infra-red such as moving body heat, and activate a load or appliance for a specified time period. An internal light sensor will keep the load switched off when sufficient ambient light is available.

    A red indicator LED signifies when timing has been re-triggered and when the unit is in its final minute of countdown. Time control is adjustable from 2 minutes to 1 hour and the unit features a white and chrome bezel allowing easy access to timing, lux and sensitivity control without the need for removing from the ceiling.

    The Elkay Ceiling Mount PIR only requires a 64mm cut out for flush mounting.

     

    Features:

    • 10A any load type
    • Sensitivity Adjustment control
    • Auto Lux and Manual Lux for extra daylight saving control
    • 10 second test mode to speed up installation time
    • Surface and Flush mount option
    • Time settings from 2mins to 1 hour
    • 360˚ Detection.
    • 6 – 7 m detection range
    • 3 wire (Live, Switch live and Neutral required)
    • Can be interlinked with other 374B-1 PIR timers
    • 64 mm cut out

    Typical applications:

    • Suitable for any load types such as lighting, heating, ventilation systems and contactor coils.
    • Suitable for use in any area where control will help reduce energy usage.

    Technical details:

    • 240V a.c. / 50Hz
    • 10A any load type
    • CE Marked
    • Complies with BS EN 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.9W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 374C-1 Flush Mount PIR Timer

    The Flush Mount PIR Timer is an energy savingdevice to switch loads only when there is presence or absence detected. This PIR timer unit has been specifically designed for ceiling mounting and includes spring fixing arms for quick and easyinstallation. This compact unit is one of the smallest most discrete units available.

    The PIR is a time switch designed to sense movinginfra red such as moving body heat, and activate a load or appliance for a specified time period. An internal light sensor in the switch will keep the load switched off when sufficient ambient light is available.

    A green indicator LED signifies when timing has been retriggered and when the unit is in its final minute of countdown. Time control is adjustable from 30 seconds to 30 minutes and the unit features easy access to timing and lux level control without the need for removing from the ceiling.

    The Elkay Ceiling Mount PIR only requires a 64mm cut out for flush mounting.

     

    Features:

    • 6A any load type
    • Manual Lux for extra daylight saving control
    • Time settings from 30 seconds to 30 minutes• 360o Detection
    • 6 – 7 m detection range
    • 3 wire with a neutral being required
    • Can be interlinked with other 374C-1 PIR timers
    • Can be wired with single gang switch and work as an absence detector
    • 64 mm cut out

    Typical applications:

    • Suitable for lighting (Instant start or hot re-strike only), heating, ventilation systems and contactor coils
    • Suitable for use in all areas where timed control can help efficient energy usage. Manual Lux for extra daylight saving.

    Technical details:

    • 240V a.c. / 50Hz
    • 10A any load type
    • CE Marked
    • Complies with BS EN 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.9W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochureFlush mount PIR timer

  • 376A-1 Illuminated PIR Timer – 2 Wire

    The PIR Timer is a fully automatic device which controls various power loads through the detection of body heat. Activated by the detection of moving body heat, the lighting or power load will then stay on for a preset period of time.

    If body heat is no longer detected, the time period will elapse and the load will be switched off. An internal light sensor will keep the lighting switched off when sufficient ambient light is available, further increasing the energy saving potential of the PIR Timer. The unit also has an override switch on the faceplate.

    Key Features

    • Fits into 25mm depth back boxes
    • Time settings from 2 mins to 2 hours
    • Lux level control
    • 360˚ detection
    • 5 -7 m detection range

    376A-1

    • 2 wire (Live and switch live only)
    • No neutral required

    Typical applications:

    • Suitable for lighting only
    • Suitable for use in any area where control will help reduce energy usage

    Technical details

    • 240V a.c. / 50Hz
    • 16A lighting load
    • CE Marked
    • Complies with BS EN 60669, 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.5W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 376A-3 Illuminated PIR Timer – 3 Core

    Stylish, electronic time delay activator switch for inter-connection with any master timer control. Any combination of activator units can be wired to any master, thus giving a variety of activation functions in one area all operating from one central master (Only one master per circuit).

    Activator switches must be used with an Elkay master timer from the Elkay family of switches. The activator activates the master unit and cannot be used on its own.

    Key Features

    • 16A any load type
    • 3 core – Live, Switch live and Trigger required to connect to master
    • No Neutral required
    • Blue Locator ring
    • Must be connected to an Elkay master timer. (Only one master per circuit).
    • Fits into 25mm depth back boxes
    • Typical applications

    Typical applications

    • It can only be used with the master switch when multiple switches are required. Any number of activators can be used in circuit and can also replace intermediate switches.

    Technical details

    • 240V a.c. / 50Hz
    • 16A lighting load
    • CE Marked
    • Complies with BS EN 60669, 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.5W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 376B-1 Standard PIR Timer – 2 Wire

    The PIR Timer is a fully automatic device which controls various power loads through the detection of body heat. Activated by the detection of moving body heat, the lighting or power load will then stay on for a preset period of time.

    If body heat is no longer detected, the time period will elapse and the load will be switched off. An internal light sensor will keep the lighting switched off when sufficient ambient light is available, further increasing the energy saving potential of the PIR Timer.

    Key Features

    • 10A any load type
    • Requires Capacitor PFCC-1 for all types of low wattage/low voltage loads
    • Fits into 25mm depth back boxes
    • Time settings from 2 mins to 1 hour
    • Lux level control
    • 360˚ detection
    • 5 – 7 m detection range

    376B-1

    • 2 wire (Live, switch live only)
    • No neutral required
    • Can be interlinked with other 376B-1 PIR timers
    • A 24 hour uninterrupted supply is required

    Typical applications:

    • General purpose PIR for use with lighting loads only
    • Suitable for retrofit into any type of lighting circuit

    Technical details

    • 240V a.c. / 50Hz
    • 10A all load types
    • CE Marked
    • Complies with BS EN 60669-1, 60669-2-1, 60669-2-3.
    • 370B-1 Power Consumption 0.52W
    • 376B-1 Power Consumption 1W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 380A-1 Microwave Motion Sensor

    The 380A-1 Microwave Motion Sensor is a high performance presence detector with built in Lux level and sensitivity adjustment. The unit sends out a high frequency sound wave over a range of up to 30 metres and is switched ON by changes to the sound wave caused by movement within the detection zone. With no changes to the sound wave, the unit will switch OFF after the adjustable time period has elapsed.

    The sensor has Lux level adjustment, measures the ambient light levels and prevents the lighting being switched ON when there is sufficient light in the room. It also has a sensitivity range adjustment pot.

    Features

    • 16A any load type (requires Capacitor PFCC-1 for all types of low wattage and LED loads)
    • 3 wire (Live, Switch live and Neutral required)
    • Wall mounted for best coverage but can be ceiling mounted if required.
    • Lux level/Daylight adjustment
    • Clip on front cover to conceal screws
    • Sensitivity Adjustment
    • Option to retrofit into existing systems
    • Time setting from 2 mins to 2 hours
    • 15m to 30m detection range utilising an elliptical beam

    Typical applications

    • Suitable for lighting, heating, ventilation systems and contactor coils.
    • Suitable for use in any area where control will help reduce energy usage
    • Suitable for High bay, warehouse, sports halls gymnasiums, classrooms etc

    Technical details

    • 240V a.c. / 50Hz
    • 16A all load type
    • CE Marked
    • Complies with BS EN 60669, 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 1W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 3875A-1 Illuminated Push Button Timer  – 3 Wire

    The Pushbutton Timer is suitable for retrofit into modern lighting systems. Able to replace existing single gang switches, to provide energy saving functionality by turning off the power source via timer, to avoid unnecessary power usage.The Pushbutton Timer must be used in conjunction activator devices for multi-way applications. This has the ability to latch back on to the mains power supply and reset in the event of a power cut. A Capacitor must be used in the circuit when switching low wattage loads such as fluorescent, compact fluorescent, and LED’s.

    Key Features

    • 16A any load type (requires Capacitor PFCC-1 for all types of low wattage loads and in LED lighting)
    • 3 wire (Live, switch live and neutral required)
    • Blue Locator ring• One minute countdown LED indicator
    • Re-set timing sequence at any time during countdown
    • Can be interlinked with any Elkay activator switches
    • Fits into 25mm depth back boxes
    • Time settings from 8 minutes to 8 hours
    • Last minute indicato
    • No Neutral require

    Typical applications:

    A general purpose timer for use with lighting loads, towel rails, heaters, contactor coils and ventilation loads. Can be retrofitted into any type of circuit with a neutral feed and interlinked with any activator timers to provide multiple switching points. Suitable for all long timing applications such as large occupied areas and battery charging etc.

    Get brochure

  • 3875A-1LT Illuminated Push Button Timer  – 3 Wire (Long Timings)

    A stylish, 3 wire, illuminated Pushbutton Timer suitable for retrofit into modern lighting systems.This version of our Push Button Timer can time from 8 minutes to 8 hours, providing longer time control. Able to replace existing single gang switches, to provide energy saving functionality by turning off the power source via timer, to avoid unnecessary power usage.The Pushbutton Timer must be used in conjunction activator devices for multi-way applications. This has the ability to latch back on to the mains power supply and reset in the event of a power cut. A Capacitor must be used in the circuit when switching low wattage loads such as fluorescent, compact fluorescent, and LED’s.

    Key Features

    • 16A any load type (requires Capacitor PFCC-1 for all types of low wattage loads and in LED lighting)
    • 3 wire (Live, switch live and neutral required)
    • Blue Locator ring
    • One minute countdown LED indicator
    • Re-set timing sequence at any time during countdown
    • Can be interlinked with any Elkay activator switches
    • Fits into 25mm depth back boxes
    • Time settings from 8 minutes to 8 hours

    Typical applications:

    A general purpose timer for use with lighting loads, towel rails, heaters, contactor coils and ventilation loads. Can be retrofitted into any type of circuit with a neutral feed and interlinked with any activator timers to provide multiple switching points. Suitable for all long timing applications such as large occupied areas and battery charging etc.

    Get brochure

  • 3875B-1 Standard Push Button Timer  – 3 Wire

    The Standard Push Button Timer is an energy saving device to switch loads for a pre-selected time period. It fits easily into a British Standard back box of 25mm depth and does not require a neutral. The timer can be interlinked in parallel with other Elkay timers to create multiply switching points. It can also replace an existing switch at the switch point to provide energy saving functionality by timing lighting off to avoid unnecessary power usage.

    A Capacitor must be used in the circuit when switching low wattage loads such as Fluorescent, compact fluorescent, and LED’s.

    Key Features

    • 10A any load type
    • Can be retrofitted into any type of lighting wiring circuit
    • Can be interlinked with other standard push button timers
    • Time setting from 2 mins to 1 hour

    3875B-1

    • 3 wire (Live, switch live and neutral)

    Typical applications:

    • Commonly used to control all load types and appliances in any room including bedrooms
    • Suitable for retrofit into any type of circuit with a neutral
    • Suitable for use in any area where control will help reduce energy usage

    Technical details

    • 240V a.c. / 50Hz
    • 10A all load types
    • CE Marked
    • Complies with BS EN 60669-1, 60669-2-1, 60669-2-3.
    • 3875B-1 – Power Consumption 0.4W
    • 350B-1 – Power Consumption 0.7W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 400A Columbus® Pneumatic Timer – Single contact

    The Columbus® pneumatic timer is an easy to fit and cost effective way of automatically turning lighting off after a set period of time. Pushing the button switches the contacts and activates the time delay, which can be set at installation anywhere between 5 seconds and 5 minutes (Note timings are approximate).

    Features

    • For fluorescent (6 fittings max.) and incandescent lighting
    • Available in white finish
    • No neutral required
    • Replaces existing single gang wall switch
    • 5 seconds to 5 minutes adjustable activation

    Typical applications

    • The unit has single or double contacts as standard and can be fitted to existing single gang switches, making it a perfect low cost energy saving solution in areas such as stairways, corridors and storerooms.

    Get brochure

  • 400A-3 Columbus® Pneumatic Timer – Double contact

    The Columbus® pneumatic timer is an easy to fit and cost effective way of automatically turning lighting off after a set period of time. Pushing the button switches the contacts and activates the time delay, which can be set at installation anywhere between 5 seconds and 5 minutes (Note timings are approximate).

    Features

    • For fluorescent (6 fittings max.) and incandescent lighting
    • Available in white finish
    • No neutral required
    • Replaces existing single gang wall switch
    • 5 seconds to 5 minutes adjustable activation

    Typical applications

    • The unit has single or double contacts as standard and can be fitted to existing single gang switches, making it a perfect low cost energy saving solution in areas such as stairways, corridors and storerooms.

    Get brochure

  • 400NE Columbus® Electronic Timer

    The Columbus Electronic Timer (2 wire) is part of the Elkay family of switches, timers and detectors which save energy and increase convenience in and around your home, garden or premises.

     

    Features

    • For fluorescent (5A) and incandescent (5A) lighting and LED (5A) ONLY
    • Available in white finish
    • No neutral required
    • Replaces existing single gang wall switch
    • Capacitor required
    • Easy loop in and out terminals for easy wiring
    • Can be linked together in parallel

    Typical applications

    • The unit can be fitted to existing single gang switches, making it a perfect low cost energy saving solution in areas such as stairways, corridors and storerooms. Very popular with people who have difficulty in operating switches due to the ease of switch operation..

    Technical Details

    • 240V a.c. / 50Hz
    • 5A lighting load
    • CE Marked
    • Complies with BS EN 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.5W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 550A-1 Outdoor Illuminated Push Button Timers

    The Outdoor Illuminated Push Button Timer (IP66) provides an electronic time delay switch for lighting, heating and other power uses in outdoor environments. Ideal for use in driveways, gardens and patio areas at homes or businesses. This easy to fit and highly cost effective unit offers energy saving functionality by timing lighting, heating and other power loads off to avoid unnecessary power usage.

    Featuring a backlit blue neon indicator ring to aid location in the dark, these intelligent units have the ability to latch back on to the mains power supply and reset in the event of a power cut. The unit is supplied with a surface mounted back box with knockouts on five faces, mounting screws and screw cover seals and nylon sealing washers. The back box provided must be used as this gives the IP rating and all connections to it must also be IP rated.

    Key Features

    • IP66 rated
    • 16A any load type
    • Re-trigger function
    • Time cancellation functions
    • Blue Locator ring
    • One minute countdown LED indicator
    • Can be interlinked in parallel with other 3 wire Elkay outdoor timer to create multiple switching points.
    • 16 Timer settings from 2 mins to 2 hours
    • Recommended connections are with IP rated Cable glands, IP rated SWA glands. It is advisable to use nylon sealing washers in connections to the box (provided for your convenience).

    550A-1

    • 3 wire (Live, switch live and neutral required)

    Typical applications

    Commonly used for:

    • Outdoor patio or infrared heaters
    • Outdoor Lighting
    • Driveway Lighting
    • Pond Pumps

    Technical details

    • IP66 rated
    • 240V a.c. / 50Hz
    • 16A all load types
    • CE Marked
    • Complies with BS EN 60669, 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.65W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 550B-1 Standard Outdoor Push Button Timer – 3 wire

    The Outdoor Push Button Timer (IP66) provides an electronic time delay switch for lighting and other power uses in outdoor environments. Ideal for use in driveways, gardens and patio areas. This easy to fit and highly cost effective unit offers energy saving functionality by timing lighting and power sources off to avoid unnecessary power usage.

    Featuring a backlit blue neon indicator ring to aid location in the dark, these intelligent units have the ability to latch back on to the mains power supply and reset in the event of a power cut. The unit is supplied with a surface mounted back box with knockouts on five faces, mounting screws and screw cover seals and nylon sealing washers.

    Features

    • IP66 rated
    • 10A any load type
    • Time cancellation functions
    • Re-trigger function
    • Timer settings from 2 mins to 1 hours
    • Recommended connections are with IP rated Cable glands, IP rated SWA glands. It is advisable to use nylon sealing washers in connections to the box

    550B-1

    • 3 wire (Live, Switch live and Neutral required)
    • Can be retrofitted into any type of wiring circuit with a neutral
    • Can be interlinked with other 550B-1 time switches

    Typical applications

    • The 550B-1 saves energy by controlling the period of time the load is on and can be retrofitted into any type of circuit with a neutral. It can be interlinked in parallel to create multiple switching points to control lighting, electric pumps and other outdoor appliances such as outdoor patio or infrared heaters.

    Technical details

    • IP66 rated
    • 240V a.c. / 50Hz
    • 10A all load types
    • CE Marked
    • Complies with BS EN 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.65W (550B-1 & 550B-3)
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 550B-3 Standard Outdoor Push Button Timer – 2 Wire

    The Outdoor Push Button Timer (IP66) provides an electronic time delay switch for lighting and other power uses in outdoor environments. Ideal for use in driveways, gardens and patio areas. This easy to fit and highly cost effective unit offers energy saving functionality by timing lighting and power sources off to avoid unnecessary power usage.

    Featuring a backlit blue neon indicator ring to aid location in the dark, these intelligent units have the ability to latch back on to the mains power supply and reset in the event of a power cut. The unit is supplied with a surface mounted back box with knockouts on five faces, mounting screws and screw cover seals and nylon sealing washers.

    Features

    • IP66 rated
    • 10A any load type
    • Time cancellation functions
    • Re-trigger function
    • Timer settings from 2 mins to 1 hours
    • Recommended connections are with IP rated Cable glands, IP rated SWA glands. It is advisable to use nylon sealing washers in connections to the box

    550B-3

    • 2 wire (Live and Switch live only)
    • No neutral required
    • Can be interlinked with other 550B-3 time switches
    • A 24 hour uninterrupted supply is required

    Typical applications

    • The 550B-1 saves energy by controlling the period of time the load is on and can be retrofitted into any type of circuit with a neutral. It can be interlinked in parallel to create multiple switching points to control lighting, electric pumps and other outdoor appliances such as outdoor patio or infrared heaters.

    Technical details

    • IP66 rated
    • 240V a.c. / 50Hz
    • 10A all load types
    • CE Marked
    • Complies with BS EN 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.65W (550B-1 & 550B-3)
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 560A-1 Illuminated Outdoor Touch Timer

    The Outdoor Illuminated Touch Timer (IP66) offers superb functionality and energy saving features with a subtle touch activation for a wide range of outdoor use. It provides an electronic time delay switch for lighting, heating and other power uses in outdoor environments. Ideal for use in driveways, gardens and patio areas at homes or businesses. This easy to fit and highly cost effective unit offers energy saving functionality by timing lighting, heating and other power loads off to avoid unnecessary power usage.

    The unit when used in outdoor environments offers increased reliability as a non-mechanical electronic unit. Knockouts on five faces, nylon washers, mounting screws and seal screw covers. Variable timing selection and a backlit blue neon indicator ring are both part of this feature-packed device. It is also suitable for multi-way applications.

    Key Features

    • IP66 rated
    • 16A any load type
    • Re-trigger function
    • Time cancellation functions
    • Blue Locator ring
    • One minute countdown LED indicator
    • Can be interlinked in parallel with other 3 wire Elkay outdoor timer to create multiple switching points.
    • 16 Timer settings from 2 mins to 2 hours
    • Recommended connections are with IP rated Cable glands, IP rated SWA glands. It is advisable to use nylon sealing washers in connections to the box (provided for your convenience).

    560A-1

    • 3 wire (Live, switch live and neutral required)

    Typical applications

    • Commonly used for

      • Outdoor patio or infrared heaters
      • Outdoor Lighting
      • Driveway Lighting
      • Pond Pumps

    Technical details

    • IP66 rated
    • 240V a.c. / 50Hz
    • 16A all load types
    • CE Marked
    • Complies with BS EN 60669-1, 60669-2-1, 60669-2-3.
    • Power consumption 0.65W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 570A-1 Illuminated Outdoor PIR Timer

    The Outdoor Illuminated PIR Timer (IP66) is a fully automatic device which controls various power loads through the detection of moving body heat. If body heat is no longer detected, the time period will elapse and the load will be switched off.

    An internal light sensor will keep the load switched off when sufficient ambient light is available, further increasing the energy saving potential of the PIR Timer. The unit also has an override switch. This IP66 rated intelligent unit, provides variable timing selection and incorporates an override facility. These intelligent units have the ability to latch back on to the mains power supply and reset in the event of a power cut.

    Featuring a backlit blue neon indicator ring to aid location in the dark, these intelligent units have the ability to latch back on to the mains power supply and reset in the event of a power cut. The unit is supplied with a surface mounted back box with knockouts on five faces, mounting screws and screw cover seals and nylon sealing washers. The back box provided must be used as this gives the IP rating and all connections to it must also be IP rated.

    Key features

    • IP66 rated
    • 16A any load type
    • Blue locator ring
    • Manual override of the Lux Level setting
    • Override OFF capability
    • Can be interlinked in parallel with other 3 wire Elkay outdoor timer to create multiple switching points.
    • 360˚ detection utilising an elliptical beam
    • 5 – 7 m detection range
    • Timer settings from 2 mins to 2 hours
    • Timings start from last detection

    570A-1

    • 3 wire (Live, switch live and neutral required)

    Typical applications

    • Commonly used for lighting where there is a neutral, to control all load types such as fluorescent, resistive and LED loads

    Technical details

    • IP66 rated
    • 240V a.c. / 50Hz
    • 16A all load types
    • CE Marked
    • Complies with BS EN 60669, 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.65W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 750A-2 Style Illuminated Push Button Timer 3 wire

    A stylish, electronic time delay switch for lighting and other power use, the push button timer can replace an existing switch to provide energy saving functionality by timing lighting and power sources off to avoid unnecessary power usage. This intelligent unit provides variable timing selection, with a backlit blue neon indicator ring also aiding location in the dark. With styling suitable for use within the most contemporary commercial and domestic installations, the one touch push button timer is only available as a 3 wire switch which requires a neutral at the switch position and can be linked in three core together for multiple switching.

    Key Features

    • For general purpose loads including resistive loads LED, incandescent and fluorescent lighting
    • Stylish stainless steel flush plate
    • Re-trigger function
    • Concealed fixing screws
    • Last minute indicator
    • Time cancellation functions
    • 16A any load type
    • 3 wire (Live, switch live and neutral required)
    • Blue Locator ring
    • Fits into 25mm depth back box
    • Time settings from 2 mins to 2 hour

    Get brochure

  • 760A-2 Style Illuminated Touch Timer Brushed Stainless Steel – 3wire

    The energy style touch timer offers superb functionality and energy saving features with the lightest of touches. The contemporary design is ideal in rooms around the home reducing energy output and providing cost savings. Variable timing selection, a backlit blue neon indicator ring and automatic reset are all part of this feature-packed device.

    Key Features

    • For general purpose loads including resistive loads LED, incandescent and fluorescent lighting
    • Stylish stainless steel flush plate
    • Re-trigger function
    • Concealed fixing screws
    • Last minute indicator
    • Time cancellation functions
    • 16A any load type
    • 3 wire (Live, switch live and neutral required)
    • Blue Locator ring
    • Fits into 25mm depth back box
    • Time settings from 2 mins to 2 hour

    Get brochure

  • 770A-2 Illuminated PIR  Timer BSS 3 wire

    For the ultimate in reliability this stylish, slimline PIR timer is activated on detection of moving body heat. The PIR timer is a fully automatic device which controls lighting and other loads through the detection of moving body heat, providing a contemporary solution to energy saving. The contemporary commercial and domestic decor. An internal light sensor can be adjusted to keep the lighting off when the chosen ambient light level is reached increasing the energy saving potential of the PIR timer.

    Key Features

    • Passive Infra-Red movement sensor
    • Stylish stainless steel flush plate
    • For general purpose loads including resistive loads, LED, incandescent and fluorescent lighting
    • Re-trigger function
    • Concealed fixing screws
    • Last minute indicator
    • 16A any load type
    • Blue Locator ring
    • Lux Level setting
    • Override OFF capability
    • 360o detection utilising an elliptical beam
    • 5 – 7 m detection range
    • Time settings from 2 mins to 2 hours
    • Timings start from last detection

    Get brochure

  • PFCC-1 Capacitor

    The PFCC-1 Capacitor is designed to assist in switching low wattage and low voltage loads.

    Typical applications

     The Capacitor should be used only with our two wire product and with the following types of load:

    • Low voltage
    • Low wattage
    • LED loads
    • Contactors*

    Only 3 wire timers with a neutral and 400NE can work with contactors and the capacitor must be fitted across the A1 and A2 (switch live and neutral) points of the contactor