370B-1 Standard PIR Timer – 3 Wire

The PIR Timer is a fully automatic device which controls various power loads through the detection of body heat. Activated by the detection of moving body heat, the lighting or power load will then stay on for a preset period of time.

If body heat is no longer detected, the time period will elapse and the load will be switched off. An internal light sensor will keep the lighting switched off when sufficient ambient light is available, further increasing the energy saving potential of the PIR Timer.

Key Features

  • 10A any load type
  • Requires Capacitor PFCC-1 for all types of low wattage/low voltage loads
  • Fits into 25mm depth back boxes
  • Time settings from 2 mins to 1 hour
  • Lux level control
  • 360˚ detection
  • 5 – 7 m detection range

370B-1

  • 3 wire (Live, switch live and neutral)
  • Can be interlinked with other 370B-1 PIR timers

Typical applications:

  • Commonly used to control all load types and appliances in any room
  • Suitable for retrofit into any type of circuit with a neutral

Technical details

  • 240V a.c. / 50Hz
  • 10A all load types
  • CE Marked
  • Complies with BS EN 60669-1, 60669-2-1, 60669-2-3.
  • 370B-1 Power Consumption 0.52W
  • 376B-1 Power Consumption 1W
  • Flame Retardant ABS material
  • RoHS compliant

Get Catalogue Page


Part No. Description Configuration Finish Rating
370B-1 Standard PIR Timer 3 Wire White 10A-240V

*PFCC-1 Capacitor will often be required when switching certain types of load

Standard Pushbutton / Standard PIR Timer fitting – 3 Wire (for all load types)

Cross Sells...

  • PFCC-1 Capacitor

    The PFCC-1 Capacitor is designed to assist in switching low wattage and low voltage loads.

    Typical applications

     The Capacitor should be used only with our two wire product and with the following types of load:

    • Low voltage
    • Low wattage
    • LED loads
    • Contactors*

    Only 3 wire timers with a neutral and 400NE can work with contactors and the capacitor must be fitted across the A1 and A2 (switch live and neutral) points of the contactor

  • 220A-1 ELKAY WALL SPACER PLATE

    Designed to fit between a switch or timer and the wall where standard 16mm cavity boxes have already been installed, saving installation time and not having to replace cavity back box with a 25mm deep box.

  • 370A-1 Illuminated PIR Timer – 3 Wire

    The PIR Timer is a fully automatic device which controls various power loads through the detection of body heat. Activated by the detection of moving body heat, the lighting or power load will then stay on for a preset period of time.

    If body heat is no longer detected, the time period will elapse and the load will be switched off. An internal light sensor will keep the lighting switched off when sufficient ambient light is available, further increasing the energy saving potential of the PIR Timer. The unit also has an override switch on the faceplate.

    Key Features

    • Fits into 25mm depth back boxes
    • Time settings from 2 mins to 2 hours
    • Lux level control
    • 360˚ detection
    • 5 -7 m detection range

    370A-1

    • 3 wire (Live, switch live and neutral required)

    Typical applications:

    • Suitable for lighting, heating, ventilation systems and contactor coils.
    • Suitable for use in any area where control will help reduce energy usage

    Technical details

    • 240V a.c. / 50Hz
    • 16A lighting load
    • CE Marked
    • Complies with BS EN 60669, 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.5W
    • Flame Retardant ABS material
    • RoHS compliant

    Get Catalogue Page

  • 210A-1 ELKAY SURFACE WALL MOUNT BOX

    The Wall Mount Box is recommended for surface mounting of the Elkay Illuminated range where the switch and box profile need to match.

Dipswitches for 3 Wire Illuminated Switches & Wall sensors Please note that the black bar denotes the position of the dip switc