376B-1 Standard PIR Timer – 2 Wire

Standard PIR Timer – 2 Wire 376B-1: Product Description

The standard PIR Timer 2 Wire 376B-1 as a touch-free product is a fully automatic device which controls various power loads through the detection of body heat. Activated by the detection of moving body heat, the lighting or power load will then stay on for a preset period of time.

If body heat is no longer detected, the time period will elapse and the load will be switched off. An internal light sensor will keep the lighting switched off when sufficient ambient light is available, further increasing the energy saving potential of the PIR Timer.

Standard PIR Timer – 2 Wire 376B-1: Key Features

  • 10A all load types including resistive, inductive, fluorescent and LED lighting
  • Requires Capacitor PFCC-1 for all types of low wattage/low voltage loads
  • Fits into 25mm depth back boxes
  • Time settings from 2 mins to 1 hour
  • Lux level control
  • 360˚ detection
  • 5 – 7 m detection range
  • 2 wire (Live, switch live only)
  • No neutral required
  • Can be interlinked with other 376B-1 PIR timers
  • A 24 hour uninterrupted supply is required

Standard PIR Timer – 2 Wire 376B-1: Typical applications

  • General purpose PIR for use with lighting loads only
  • Suitable for retrofit into any type of lighting circuit

Standard PIR Timer – 2 Wire 376B-1: Technical details

  • 240V a.c. / 50Hz
  • 10A all load types
  • CE Marked
  • Complies with BS EN 60669-1, 60669-2-1, 60669-2-3.
  • 370B-1 Power Consumption 0.52W
  • 376B-1 Power Consumption 1W
  • Flame Retardant ABS material
  • RoHS compliant

Get Catalogue Page

ELKAY Timer & Switch Instructions

Part No. Description Configuration Finish Rating
376B-1 Standard PIR Timer 2 Wire* (for lighting only) White 10A-240V

*PFCC-1 Capacitor will often be required when switching certain types of load

Standard Pushbutton / Standard PIR Timer fitting – 2 Wire (for lighting only)

Dipswitches for 2 Wire Switches & Wall Sensors
Plan View for the top diagram and Side view for the lower diagram Elkay PIR Occupancy sensors will detect any person passing the wall mounted sensor and switch on the load connected.