3875A-1 Illuminated Push Button Timer  – 3 Wire

Illuminated Push Button Timer  – 3 Wire 3875A-1: Product description

The Illuminated Push Button Timer  – 3 Wire is suitable for retrofit into modern lighting systems. Able to replace existing single gang switches, to provide energy saving functionality by turning off the power source via timer, to avoid unnecessary power usage.The Push button Timer must be used in conjunction activator devices for multi-way applications. This has the ability to latch back on to the mains power supply and reset in the event of a power cut.

Illuminated Push Button Timer  – 3 Wire 3875A-1: Key Features
  • 3 wire (Live, switch live and neutral required)
  • 16A any load type
  • Blue Locator ring
  • One minute countdown LED indicator
  • Re-set timing sequence at any time during countdown
  • Can be interlinked with any Elkay activator switches
  • Fits into 25mm depth back boxes
  • Time settings from 2 minutes to 2 hours
Illuminated Push Button Timer  – 3 Wire 3875A-1: Typical Applications

A general purpose timer for use with lighting loads, towel rails, heaters, contactor coils and ventilation loads. Can be retrofitted into any type of circuit with a neutral feed and interlinked with any activator timers to provide multiple switching points. Suitable for all long timing applications such as large occupied areas and battery charging etc.

Get Catalogue Page

ELKAY Timer & Sensor instructions

Part No. Type Configuration Finish Rating
3875A-1 Pushbutton master 3 Wire White 16A-240V

**Activator unit must be used with illuminated range for multiway switching and connected with 3 Core cables to Master unit.

Illuminated Push Button Timer 3 wire master with activator