560A-1 Illuminated Outdoor Touch Timer

The Outdoor Illuminated Touch Timer (IP66) offers superb functionality and energy saving features with a subtle touch activation for a wide range of outdoor use. It provides an electronic time delay switch for lighting, heating and other power uses in outdoor environments. Ideal for use in driveways, gardens and patio areas at homes or businesses. This easy to fit and highly cost effective unit offers energy saving functionality by timing lighting, heating and other power loads off to avoid unnecessary power usage.

The unit when used in outdoor environments offers increased reliability as a non-mechanical electronic unit. Knockouts on five faces, nylon washers, mounting screws and seal screw covers. Variable timing selection and a backlit blue neon indicator ring are both part of this feature-packed device. It is also suitable for multi-way applications.

Key Features

  • IP66 rated
  • 16A any load type
  • Re-trigger function
  • Time cancellation functions
  • Blue Locator ring
  • One minute countdown LED indicator
  • Can be interlinked in parallel with other 3 wire Elkay outdoor timer to create multiple switching points.
  • 16 Timer settings from 2 mins to 2 hours
  • Recommended connections are with IP rated Cable glands, IP rated SWA glands. It is advisable to use nylon sealing washers in connections to the box (provided for your convenience).

560A-1

  • 3 wire (Live, switch live and neutral required)

Typical applications

  • Commonly used for

    • Outdoor patio or infrared heaters
    • Outdoor Lighting
    • Driveway Lighting
    • Pond Pumps

Technical details

  • IP66 rated
  • 240V a.c. / 50Hz
  • 16A all load types
  • CE Marked
  • Complies with BS EN 60669-1, 60669-2-1, 60669-2-3.
  • Power consumption 0.65W
  • Flame Retardant ABS material
  • RoHS compliant

Get brochure


Part No. Description Configuration Finish Rating
560A-1 Outdoor Illuminated Touch Timer White 3 wire Master 3 wire White 16A-240V

Wiring diagram for a single 560A-1 timer unit

Additional 3 wire Outdoor pushbutton, touch and PIR can be connected together in parallel for multiple switching

Cross Sells...

  • PFCC-1 Capacitor

    The PFCC-1 Capacitor is designed to assist in switching low wattage and low voltage loads.

    Typical applications

     The Capacitor should be used only with our two wire product and with the following types of load:

    • Low voltage
    • Low wattage
    • LED loads
    • Contactors*

    Only 3 wire timers with a neutral and 400NE can work with contactors and the capacitor must be fitted across the A1 and A2 (switch live and neutral) points of the contactor

  • 550A-1 Outdoor Illuminated Push Button Timers

    The Outdoor Illuminated Push Button Timer (IP66) provides an electronic time delay switch for lighting, heating and other power uses in outdoor environments. Ideal for use in driveways, gardens and patio areas at homes or businesses. This easy to fit and highly cost effective unit offers energy saving functionality by timing lighting, heating and other power loads off to avoid unnecessary power usage.

    Featuring a backlit blue neon indicator ring to aid location in the dark, these intelligent units have the ability to latch back on to the mains power supply and reset in the event of a power cut. The unit is supplied with a surface mounted back box with knockouts on five faces, mounting screws and screw cover seals and nylon sealing washers. The back box provided must be used as this gives the IP rating and all connections to it must also be IP rated.

    Key Features

    • IP66 rated
    • 16A any load type
    • Re-trigger function
    • Time cancellation functions
    • Blue Locator ring
    • One minute countdown LED indicator
    • Can be interlinked in parallel with other 3 wire Elkay outdoor timer to create multiple switching points.
    • 16 Timer settings from 2 mins to 2 hours
    • Recommended connections are with IP rated Cable glands, IP rated SWA glands. It is advisable to use nylon sealing washers in connections to the box (provided for your convenience).

    550A-1

    • 3 wire (Live, switch live and neutral required)

    Typical applications

    Commonly used for:

    • Outdoor patio or infrared heaters
    • Outdoor Lighting
    • Driveway Lighting
    • Pond Pumps

    Technical details

    • IP66 rated
    • 240V a.c. / 50Hz
    • 16A all load types
    • CE Marked
    • Complies with BS EN 60669, 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.65W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

  • 570A-1 Illuminated Outdoor PIR Timer

    The Outdoor Illuminated PIR Timer (IP66) is a fully automatic device which controls various power loads through the detection of moving body heat. If body heat is no longer detected, the time period will elapse and the load will be switched off.

    An internal light sensor will keep the load switched off when sufficient ambient light is available, further increasing the energy saving potential of the PIR Timer. The unit also has an override switch. This IP66 rated intelligent unit, provides variable timing selection and incorporates an override facility. These intelligent units have the ability to latch back on to the mains power supply and reset in the event of a power cut.

    Featuring a backlit blue neon indicator ring to aid location in the dark, these intelligent units have the ability to latch back on to the mains power supply and reset in the event of a power cut. The unit is supplied with a surface mounted back box with knockouts on five faces, mounting screws and screw cover seals and nylon sealing washers. The back box provided must be used as this gives the IP rating and all connections to it must also be IP rated.

    Key features

    • IP66 rated
    • 16A any load type
    • Blue locator ring
    • Manual override of the Lux Level setting
    • Override OFF capability
    • Can be interlinked in parallel with other 3 wire Elkay outdoor timer to create multiple switching points.
    • 360˚ detection utilising an elliptical beam
    • 5 – 7 m detection range
    • Timer settings from 2 mins to 2 hours
    • Timings start from last detection

    570A-1

    • 3 wire (Live, switch live and neutral required)

    Typical applications

    • Commonly used for lighting where there is a neutral, to control all load types such as fluorescent, resistive and LED loads

    Technical details

    • IP66 rated
    • 240V a.c. / 50Hz
    • 16A all load types
    • CE Marked
    • Complies with BS EN 60669, 60669-1, 60669-2-1, 60669-2-3.
    • Power Consumption 0.65W
    • Flame Retardant ABS material
    • RoHS compliant

    Get brochure

Dipswitches for 3 Wire Illuminated 560A-1 Switches Please note that the black bar denotes the position of the dip switch