400A-3 Columbus® Pneumatic Timer – Double contact

The Columbus® pneumatic timer is an easy to fit and cost effective way of automatically turning lighting off after a set period of time. Pushing the button switches the contacts and activates the time delay, which can be set at installation anywhere between 5 seconds and 5 minutes (Note timings are approximate).

Features

  • For fluorescent (6 fittings max.) and incandescent lighting
  • Available in white finish
  • No neutral required
  • Replaces existing single gang wall switch
  • 5 seconds to 5 minutes adjustable activation

Typical applications

  • The unit has single or double contacts as standard and can be fitted to existing single gang switches, making it a perfect low cost energy saving solution in areas such as stairways, corridors and storerooms.

Get Catalogue Page


Part No. Description Configuration Finish Rating
400A-3 Columbus Pneumatic Timer Double contact White 3A-6A-240V

Typical Circuit for Corridor Lighting
(i.e. Lights will stay on until last timer goes off)

Typical Circuit for Corridor Lighting
(i.e. Lights will stay on until last timer goes off)

Cross Sells...

  • 220A-1 ELKAY WALL SPACER PLATE

    Designed to fit between a switch or timer and the wall where standard 16mm cavity boxes have already been installed, saving installation time and not having to replace cavity back box with a 25mm deep box.

  • 400A Columbus® Pneumatic Timer – Single contact

    The Columbus® pneumatic timer is an easy to fit and cost effective way of automatically turning lighting off after a set period of time. Pushing the button switches the contacts and activates the time delay, which can be set at installation anywhere between 5 seconds and 5 minutes (Note timings are approximate).

    Features

    • For fluorescent (6 fittings max.) and incandescent lighting
    • Available in white finish
    • No neutral required
    • Replaces existing single gang wall switch
    • 5 seconds to 5 minutes adjustable activation

    Typical applications

    • The unit has single or double contacts as standard and can be fitted to existing single gang switches, making it a perfect low cost energy saving solution in areas such as stairways, corridors and storerooms.

    Get Catalogue Page

  • 210A-1 ELKAY SURFACE WALL MOUNT BOX

    The Wall Mount Box is recommended for surface mounting of the Elkay Illuminated range where the switch and box profile need to match.

  • 163 Columbus Shroud Splash Proof

    The 163 is a protective cover kit consisting of rubber shroud, finger ring, gasket and 2 screws

    Suitable for use with 400A and 400A-3 time delay switches

    Makes your switch suitable for damp areas and prevents damage to the switch.

    WARNING – Does not provide switch with an IP rating for outdoor use